Everything You Need to Know About the CBD Oil Extraction Process

0 0 votes
Please Rate This Article!

The extraction process is one of the most important parts of producing CBD oil. The final product often depends on this extraction procedure, as it involves the crucial step of separating CBD from other cannabinoids, terpenes or plant compounds. Only then can pure CBD be isolated to produce a 100% natural and effective cannabis extract with maximum health benefits.

The extraction process is the most important part of making CBD oil. With this method, you can achieve a high concentration of cannabidiol (CBD) in your final product. If you don’t do it correctly, then the amount of CBD that ends up in your medicine might not be enough to have an effect on your condition. Check out some of the articles on types of Vapes

At Kopēļciems , they use organic ethanol for our CBD oil extraction process because it’s safe for people and doesn’t leave any toxic residue behind like other methods do. Ethanol has been used to extract oils since the Neolithic era, so it’s nothing new or experimental. It’s considered one of the safest solvents today thanks to its low toxicity levels—it even has a generally recognized as safe (GRAS) status from the FDA.

CBD oil extraction with ethanol is done through a distillation process that requires some patience and expertise. It’s important to be careful while you’re doing this, because the temperature of the ethanol has a direct effect on your end product. They worked with scientists from Colorado State University to make sure we were using the correct temperatures for each step of our extraction process. Check out our article best temp to vape weed

In short, here are the steps in detail:

First, coarsely grind up your CBD flower using a grinder or food processor . This will help heat absorption during the next step. Then, add just enough ethanol into your ground flower so that it’s moist but not floating in liquid—you just want to barely cover it.

Advertisement

banners

Set your mixture aside in a safe place where children or pets won’t be able to get into it, and let the mixture sit undisturbed for 30 minutes . This is called “decarboxylation”, so don’t skip this step!

Advertisement

Place the mixture in a pressure cooker , making sure not to fill it more than half way with your ground flower. Then, seal the lid and turn the heat on high until steam flows out of the valve. At that point, you should lower the heat to medium-high to maintain constant steam flow . You’ll know when it’s done when there are 2-3 drops of dark brown liquid dripping from the valve in a few seconds—it should take around 60 minutes to get there.

Now that the pressure cooker is done, let the mixture cool down for 30 – 60 minutes . This lets any leftover solvent evaporate. Once it’s cooled off you can pop open your lid and pour everything into a strainer . If you see any brown particles in your oil , you should run it through the filter one more time until they’re gone.

Advertisement

At this point, your CBD oil will be slightly green, but don’t worry— the winterization step (the next step) then it will turn into golden oil like it’s supposed to be. The winterization process removes fats and lipids from our CBD extract because they can cause stomach upset when consumed by people who are prone to it.

Now that you know all about the CBD oil extraction process, take a look at our selection of oils to see which type will work best for your needs! It can carry many strains, flavors and concentrations.

If you’re looking for an easy-to-use CBD tincture, try Pūr Hemp’s sprays . They don’t contain any THC, so they won’t make you high no matter how much you spray under your tongue.

Other ways of extracting CBD oil:

The most common way of extracting CBD is by using food grade ethanol as the solvent. The ethanol is put together with cannabis plant matter and heated so that the ethanol evaporates. Once all of the ethanol has been evaporated, what is left behind is a very concentrated form of CBD oil containing pure CBD.

Some companies use a different method to extract CBD oil from cannabis plants known as supercritical CO2 extraction . This method uses extremely high pressure and extremely low temperatures to isolate the cannabinoids from the rest of the plant material.

There are many reasons why people prefer one type of extraction over another—whether it’s for health reasons or whether they’re just not comfortable with certain processes.

Wrapping it up:

The whole process is pretty easy to understand once you know what you’re doing. If you want the best CBD around, CBDfx makes sure their oil goes through a rigorous hemp-based extraction process before it’s sent out for distribution. It takes more time, but the result is CBD oil that is 100% natural and absolutely pure.

To see how our specific CBD extraction method preserves cannabinoids and terpenes while removing unwanted plant lipids, read other blog postings.

0 0 votes
Please Rate This Article!

Author: Guest Blogger

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments